RCC Structures Design Mcqs
Q.1: Pick up the correct statement from the following?1
A. Lateral reinforcement in R. columns is provided to prevent the longitudinal reinforcement from bucklingg
B. Lateral reinforcement prevents the shearing of concrete on diagonal planeI
C. Lateral reinforcement stops breaking away of concrete cover, due to bucklingL
D. All the above
Q.2: Pick up the incorrect statement from the following?3
A. In the stem of a retaining wall, reinforcement is provided near the earth sideN
B. In the toe slab of a retaining wall, reinforcement is provided at the bottom of the slabX
C. In the heel slab of a retaining wall, reinforcement is provided at the top of the slabV
D. None of these
Q.3: In a simply supported slab, alternate bars are curtailed at________________?L
A. 1/4th of the span
B. 1/5th of the span
C. 1/6th of the span
D. 1/7th of the span
Q.4: If the modular ratio is , steel ratio is and overall depth of a beam is , the depth of the critical neutral axis of the beam, is___________________?
A. [m/(m r)] d
B. [m/(m + r)] d
C. [(m + r)/ m] d
D. [(r m)/m] d
Q.5: For a number of columns constructed in a rcjw, the type of foundation provided, is_______________?b
A. Footing
B. Raft
C. Strap
D. Strip
Q.6: As the percentage of steel increases________________?5
A. Depth of neutral axis decreases
B. Depth of neutral axis increases
C. Lever arm increases
D. Lever arm decreases
Q.7: The length of lap in tension reinforcement should not be less than the bar diameter (actual tension / four times the permissible average bond stress) if it is more than_______________?
A. 18 bar diameters
B. 24 bar diameters
C. 30 bar diameters
D. 36 bar diameters
Q.8: The effective width of a column strip of a flat slab, is_______________?H
A. One-fourth the width of the panel!
B. Half the width of the panel
C. Radius of the column
D. Diameter of the column
Q.9: Dimensions of a beam need be changed if the shear stress is more than_______________?U
A. 10 kg/cm2
B. 15 kg/cm2
C. 20 kg/cm2
D. 25 kg/cm2
Q.10: Pick up the correct statement from the following?1
A. A pile is a slender member which transfers the load through its lower end on a strong strata\
B. A pile is a slender member which transfers its load to the surrounding soilK
C. A pile is a slender member which transfers its load by friction?
D. A pile is a cylindrical body of concrete which transfers the load at a depth greater than its widthc

Related Mcqs

All Subject Mcqs